| Mac Dialup Networking
Setup |
Instructions
Below (step by step) |
 | Step 1.
Click
on your Mac Hard Drive. |
 | Step 2.
Click
on the Mac Assistants folder. |
 | Step 3.
Click
on the Internet Setup Assistant. |
 | Step
4.
Internet Setup Assistant appears. Simply click Yes to
continue... |
 | Step 5.
The
next screen will ask if you already have an Internet account; click Yes to
continue... |
 | Step 6.
This
screen asks you if you have the information needed to set up your account.
Click the arrow in the bottom right to move on to the next step...
Note that
for a typical dialup account, it is not necessary for you to know the DNS
server nor the IP address as these will be setup to be “server
assigned” later in the configuration process. |
 | Step 7.
This
screen will ask for what name you would like to call your connection, enter
DMSAccess, and then select Modem and click the arrow to continue... |
 | Step 8.
The
Macintosh OS usually selects the modem already installed on your system. If you
wish to choose a different modem, select it from the drop down list, as well as
the port you wish to use. Click the arrow to move to the next
step... |
 | Step 9.
This
step will ask you for your local dialup number; enter it without the area code
unless you have 10-digit dialing in your area.
It will also ask for your
Login ID. Your Login ID is your username plus the @dmsaccess.com realm
(example: user@dmsaccess.com). Your login ID MUST be all lowercase letters and
have the @dmsaccess.com realm. Click the arrow to move to the next
step... |
 | Step 10.
This
screen asks you if you require a PPP connect script when you log on. Select no
and click the right arrow to continue... |
 | Step 11.
This
step asks if you if there is a specific Static IP address for your setup,
select No and click the arrow to continue to the next step... |
 | Step 12.
This
screen asks you for your Domain Name Servers (DNS). It is recommended that you
leave this blank and your DNS servers will be assigned automatically when you
connect to DMSAccess. However, if you are having difficulties browsing the web
once connected, you can enter the following sets of IP address
numbers.
DMSAccess.com DNS Server IP’s
208.234.1.33 216.117.131.52
In the Domain Name box you can enter
DMSAccess.com. The domain name is optional. Click the right arrow to move to
the next step... |
 | Step 13.
This
screen asks for your e-mail address and password. Please enter your e-mail
address (example: johnsmith@dmsaccess). You must enter this information in all
lower case letters. Your e-mail password must also be in all lower-case
letters. Click the right arrow to move to the next step... |
 | Step 14.
This
screen is asking for the incoming (POP3) and outgoing (SMTP) mail server names.
In the first field, enter just your username, and leave off @dmsaccess
(example: johnsmith).
In the second field, enter the dmsaccess mail host
server which is dmsaccess.com . Click the right arrow to move to the next
step... |
 | Step 15.
This
step is looking for the News server name. You may skip this step. |
 | Step 16.
This
step is asking if you are using a proxy server. Unless you are using a proxy
server, or if you have no idea what a proxy server is, then select No and click
the right arrow to move to the next step... |
 | Step 17.
This
is the final step in setting up your internet connection for DMSAccess. Take
the check mark out of "Connect when finished" and then click on "Go Ahead" to
complete your setup. |
Main Site 
Access
Numbers
Support
